|
|
|
|
|
 |
UMUX
Product description:
The UMUX 1500 is a state of the art multi-services access multiplexer. It provides both copper and fibre based transmission interfaces and offers a unique and integrated blend of legacy (TDM) and modern (ATM and IP) services.
Key Features:
21 slot chassis (smaller 8 slot chassis also available)
Redundant power supply and controller cards
128 x E1 backplane capacity on PDH
2 x STM-1 backplane capacity on SDH
19" x 6U rack dimensions
Front cabling for easy access
-48V DC power (AC power also available on smaller chassis)
Transmission interfaces:
SDH STM-1 Optic Fibre
SDH STM-1 Electrical
PDH 4 x E1 Optic Fibre
G.703 2Mb/s electrical
HDSL and MSDSL
User interfaces:
Voice
V5.2
NGN (VoIP)
2 Wire analogue (up to 480 POTS lines per chassis)
4 Wire analogue E&M
ISDN PRI and BRI (no switching)
Data
G.703 2Mb/s
X.24/X.21
V.35
V.24 (RS-232)
G.703 64kb/s Co-Directional
ISDN PRI and BRI (no switching)
IP
Router card with routing/bridging functionality and 10BaseT interface
Active hub card
High capacity bridging card (100BaseT and Gigabit Ethernet, SDH transmission)
Voice over IP gateway card
Desktop units
2B1Q low speed data NTU (128kb/s)
HDSL NTU with choice of data interfaces (up to 2Mb/s)
MSDSL NTU with built-in router and mini-hub
MSDSL NTU with IP/data/voice combinations
Optic fibre NTU with 4 x E1 interfaces
ATM
ATM transmission
ADSL and DSLAM functionality
Inverse multiplexing over ATM
E1 Circuit emulation
Management:
UCST - Very comprehensive WindowsTM based craft terminal with GUI for field maintenance/small networks
UNEM - UNIX based management system with GUI and active network map for medium to large networks
|
|
TUNOR - 4xE1 over optic fibre
Product description:
8Mb/s Optic fibre modem. Ideal for connecting 2Mb/s interfaces over optic fibre.
Key Features:
Part of UMUX family
Small metal desktop unit
Can be ordered as 48V DC or 220V AC
1 x 8Mb/s optical interface
4 x E1 electrical interfaces
Optional V.11 interfaces
Can be used with UMUX or in back-to-back configuration
|
|
Nuera Voice Compression equipment - ORCA GX Series
Product description:
High end VoIP to PSTN media gateway. Ideal as media gateways for NGN networks. Can also be used in back to back configuration as voice compression equipment, providing a realistic 8:1 compression ratio.
Key Features:
Voice over IP to PSTN media Gateway
Input interfaces = multiple E1 or T1
Output interface = 100BaseT Ethernet
Uses VoIP technology to provide high quality voice compression with support for fax and modems
Supports ITU standard vocoders and voice processing algorithms including G.711, G.723.1, and G.729/G.729A with G.165 Echo Cancellation
Support for both fixed connections and switched connections
Two choices of chassis allows for scalability to suit the client's needs
Supports most major signaling protocols
Available in AC and DC power
Redundant controller cards and power supplies
Capacity:
ORCA GX-8 = 16 x E1
ORCA GX-21 = 68 x E1
Signaling:
MGCP, NCS, SIP, CAS, R2, SS7, ISDN
Management:
Nuera Configurator - WindowsTM based craft terminal with GUI
NueraView - HP Openview management system with GUI
|
|
SIAE microwave radio
Product description:
Full range of microwave radios from an established Italian company with a reputation for high quality products.
Key Features:
Wide range of PDH and SDH microwave radios
Wide range of frequencies and capacities supported (8 x E1, 16 x E1, Ethernet or E3)
Recently introduced low cost all outdoor series with 4 x E1, Ethernet or E3
Unprotected (1+0) and protected (1+1) configurations available
Use standard microwave antennas and flanges
48V DC power
Management:
Handheld terminal or WindowsTM based craft terminal for field maintenance
UNIX based management system for managing large networks
|
|
Voice over IP Gateway
Product description:
Our Voice over IP gateway allows you to connect normal analog phones and fax machines to SIP or H.323 based VoIP networks. It also allows you to create your own little VoIP network, complete with soft switching between ports.
Key Features:
Voice over IP technology
Supports 2, 4 or 8 channels of real- time voice and fax in a single embedded box
Modular design to accommodate various types of telephony interfaces (FXS, FXO or 4-wire E&M)
Supports programmable line interfaces with country specific telephone settings
Supports ITU standard vocoders and voice processing algorithms including G.711, G.723.1, and G.729 A/B with G.168 Echo Cancellation
Network interface = 10/100BaseT Ethernet
SIP, H.323 call control protocol compliant
Soft Switch functionality allows unit to act as a small PABX
QoS support for VoIP packets
Ideal for use with Spread Spectrum type Wireless LAN to provide small number of POTS lines
Very competitively priced compared to competition
Versions Available:
2 x 2 Wire POTS
4 x 2 Wire POTS
8 x 2 Wire POTS
8 x 4 Wire E&M
Management:
User friendly management including console port interface, HTTP and Telnet servers, and Server for VoIP related management such as call control and dial plan set up
Built-in TFTP and flash memory for software download and upgrade via network
|
|
Wireless LAN - Spread Spectrum Radio
Two ranges of Wireless LAN (802.11 and 802.16) to choose from.
Key Features:
All outdoor units
User interface = 10/100BaseT Ethernet (installation kit includes outdoor CAT-5 cable)
IP-based with choice of routing or bridging functionality
Radio interface throughput of at least 11Mb/s, but dependant on radio and model chosen
License free 2.4GHz and 5.8GHz bands
Adjustable frequencies and group ID to avoid interference
Can be used in Point to Point, Point to Multi-Point or Meshed configuration
End terminals can be used as repeater sites
Easy to install and configure
Management:
Web based craft terminal
No need for DIP switch settings, all configurations done via software
Performance monitoring on radio and user interfaces
|
|
|
|
|
|
